Cleaning and lubricating devices LUB90

Technical data:
Work air pressure: 0.3-0.6Mpa
Air consume: 60 L/min
Outside dimensions: 190×415×223mm
Weight: 2.7kg

Working procedure:
Blowing scraps:
High-speed air stream forms negative pressure vacuum in the crevice of handpiece inside the cavity, blowing away the impurities from inside the pipes and crevices.

Wash by rinse liquid:
Rinse liquid runs with air -stream in to crevices at negative pressure, watering away the dirt.

Puffing:
Blow dry the remnants inside the cavity of the handset turbine.

Lubricating:
Lubricant enters negative -pressured crevices and carries out all-around lubrication.

Puffing:
Blow away surplus lubricant ,spreading oil film evenly over exletree bearings and wind wheel axis.

Finishing:
Now the bearings ,wind wheel and pipes have been rinsed and lubricated and can be sealed for sterilization.